where to get blue dots?

Want the specs for a valve adjustment? Can you provide tips for bleeding brakes? Please use this section.
Post Reply
fastrsho
New Poster
Posts: 49
Joined: Mon Jun 04, 2007 1:22 am
Location: valdosta,georgia

where to get blue dots?

Post by fastrsho »

looking to get some blue dot calipers but dont know where to get them?Also is there anywhere that sells any aftermarket parts for the yzf 750?
ITS NOT BROKE...TIL YOU CANT FIX IT NO MORE

User avatar
FZRDude
Co-Admin
Posts: 4810
Joined: Tue Jan 13, 2004 3:20 am
Location: North-Left Coast, USA
Contact:

Post by FZRDude »

Any R1/R6 up to 05 will work (eBay). I recommend getting a new master cylinder and braided lines as well, but that's just me...
There are some who call me........Tim?
In Memory Of John "Silver" Douglas (Dec. 08, 2008) R.I.P. My Friend.

:wave: :popcorn :cursing :super-mad

fastrsho
New Poster
Posts: 49
Joined: Mon Jun 04, 2007 1:22 am
Location: valdosta,georgia

Post by fastrsho »

front and rear?and are they a direct fit?
ITS NOT BROKE...TIL YOU CANT FIX IT NO MORE

User avatar
FZRDude
Co-Admin
Posts: 4810
Joined: Tue Jan 13, 2004 3:20 am
Location: North-Left Coast, USA
Contact:

Post by FZRDude »

I'm going to say no on the rear, but I haven't tried.

On the fronts, theres a little half moon that you'll going to have to grind away on the fork leg, but it is simple to do and can be done with the bike just sitting there. No stands needed and wheel doesn't have to come off.

Easiest way, I learned from a member here.

Take the old calipers off, take one of the blue spots and mount it with the top bolt only and only a couple of turns on the bolt as you'll be taking it right back off. When the caliper comes to rest against the fork leg, this is where you'll be removing some material. It really isn't as much metal as it looks. Mark the area with a sharpie and grab the dremel and get at it.
There are some who call me........Tim?
In Memory Of John "Silver" Douglas (Dec. 08, 2008) R.I.P. My Friend.

:wave: :popcorn :cursing :super-mad

Post Reply