yzf750 calipers
Posted: Sun Jan 21, 2007 4:42 am
Hi will yzf750/yzf1000 6 pot calipers fit straight on to a 1990 fzr 1000 exup or is there some work involved to make them fit.
Dave.
Dave.
They fit straight on.
Chris
EXUP Worldwide
EXUP Worldwide was born from the ashes of the original EXUP Brotherhood – the definitive forum for all those who have interest in Yamaha FZ, FZR, and YZF motorcycles.
https://www.exupworldwide.com/forum/
yzf750 calipers
https://www.exupworldwide.com/forum/viewtopic.php?f=7&t=7251
Page 1 of 1
calipers
Posted: Sun Jan 21, 2007 5:40 am
Posted: Sun Jan 21, 2007 4:06 pm
Thanks Chris that's what i thought but best to check first before i buy some.
Cheers
Dave.
Cheers
Dave.
Posted: Sat Feb 10, 2007 4:30 pm
I bought a pair of yzf 6 pots and made sure that they were working as they should like all 6 pistons in each caliper were free and moving when the brake lever was pressed, fitted them and bled the system of air and now i have good brakes, well far better than the std 4 pots, i didn't have a problem fitting them either everything lined up as it should and bolted straight on and the lever has more feel now to, so job's a good one.
Dave
Dave
Posted: Tue Apr 03, 2007 1:58 pm
here my babies
Posted: Wed Apr 04, 2007 2:33 pm
pretech makes some cool stuff. hard to get stateside however.
i also found that with the stock six pots you have to make sure they stay clean and greased or the pistons will seize a bit quicker than some of the other stock calipers.
i also found that with the stock six pots you have to make sure they stay clean and greased or the pistons will seize a bit quicker than some of the other stock calipers.