FZ750 Fork tube removal

weiner127 · Post by **weiner127** » Thu May 10, 2007 10:10 am

Replacing fork seals. Can someone tell me how to remove the pieces on the fork tubes that the air crossover line connects to. There doesnt appear to be a clip or screw or anything on them. Thanks

Post by **FZRDude** » Thu May 10, 2007 11:23 am

Looks like you take the bars off, then remove the top triple and then it comes off as a whole assembly (the part with the air line).

Be sure to release all pressure in the system twice before starting this project.

weiner127 · Post by **weiner127** » Thu May 10, 2007 3:50 pm

I've tried to slip the tubes out the lower tree. I've taken the line off. There must be a way to remove these pieces from the tubes either as a unit or individually. Pain in the ass for sure, I guess they're stuck good after 22 yrs

weiner127 · Post by **weiner127** » Thu May 10, 2007 5:56 pm

amazing what ya find with a bit more light, there's a c-clip under each piece, pop it off, drop them out. Thanks