EXUP Worldwide

I know Tim is busy getting ready to explode the rear end on his bike, so anybody else planning on doing mods over the winter?

Right now the only things I have lined up are replacing little things like wheel bearing and what not. Only semi-major project is making the swap to R1 calipers. Picked up a pair off Ebay the other day for cheap. Really want to do an engine rebuild, but won't have the money and especially time to do that this year.

just finished a R1 master cylinder swap on teh front, which has the calipers already.

Would love to do stainless lines up front, and I have a full R1 rear brake setup to go on.

Also would like to get dogbones to raise the rear up a good 2 inches. and examine a R1 tail swap maybe, or atleast a integrated clear tail light setup

haunter wrote:Also would like to get dogbones to raise the rear up a good 2 inches.

Might check with Jim (dragracer) and see if he has some doggies left.

Curious about the rear R1 caliper. How are you planning on mounting that? That doesn't use the setup like the FZR does, does it? Meaning where it has the axle running through the mounting hole.

orionburn wrote:

haunter wrote:Also would like to get dogbones to raise the rear up a good 2 inches.

Might check with Jim (dragracer) and see if he has some doggies left.

Curious about the rear R1 caliper. How are you planning on mounting that? That doesn't use the setup like the FZR does, does it? Meaning where it has the axle running through the mounting hole.

dunno, havent really looked, I was told all the breaks from FZR up are interchangable.

Yeah I was gunna get ahold of Jim, I was told her makes them and ships them and they are quite well made and well priced.

I also need to get a new windscreen, and get some new front signals

I just picked up a full R1 brake system today off of Ebay. Planning on doing the swap to the 17" in a few months, and may attempt to put the R1 rear caliper on then. Guess we can compare notes down the road...lol

no winter mods, but quite a bit of maintenance...tires, chain/sprockets, coolant change, stainless lines/fluid change/front pads, and an oil change...may upgrade the rear shock, and have kits installed into the forks...tossing around the idea of a slipper clutch...

maybe i'll just stick to the maintenance, and ask santa for the rest

I am finishing up the 6speed transmission swap and installing a lightened balanced crank and new special rods

She is also getting painted

won a great deal on an R1 tail last night while I was sleeping.


just the bare plastic, just testing fitment now, can get a cowl and tail light and seat if its gunna an easy fit.


would LOVE to do a new swinger at some point, even if its just an EXUP's


but have to do some reading on what will go in easy enough

Engine rebuild, and chain and sprockets. That about all I can do this year.

ALMOST ALL PARTS ORDERED BUT THE LIST CONSISTS OF NEW TIRES, S.S GALFER LINES ON THE FRONT REAR AND CLUTCH, 99 R1 TAIL SWAP 01 R1 SWINGARM, GALFER ROTORS FRONT AND REAR, SINTERED PADS AT BOTH ENDS, POLISHING THE FRAME AND SWINGARM, AND STILL TRYING TO PICK OUT A NEW COLOR. 1 QUESTION THOUGH I WANTED TO DO NEW COOLANT HOSES BUT DIDN'T WANT STOCK ANYONE GOT ANY SUGGS. OR LINKS TO WHERE I MIGHT FIND SOMETHING?

I'm doing a fuel injection system on my bike. Most of the parts are ordered. I also bought a brand new D&D slip-on off of ebay last night. New brake pads are coming and still need to order a chain and sprocket set.

91-93 front end swap, new body work, R1 caliper swap, LEDgear clocks (should be shipping out soon I hope) Here's a sneaky peek.....

Sorry FZR Dude, couldn't contain myself any longer, but this is all I'm showing until it's done.

RUFtech wrote:I'm doing a fuel injection system on my bike. Most of the parts are ordered. I also bought a brand new D&D slip-on off of ebay last night. New brake pads are coming and still need to order a chain and sprocket set.

I saw some colored silicone hoses last night while cruising the net, I'll try to find that link for you.

Mad Hatter wrote:

RUFtech wrote:I'm doing a fuel injection system on my bike. Most of the parts are ordered. I also bought a brand new D&D slip-on off of ebay last night. New brake pads are coming and still need to order a chain and sprocket set.

I saw some colored silicone hoses last night while cruising the net, I'll try to find that link for you.

Thanks Mike

RUFtech wrote:

Mad Hatter wrote:

RUFtech wrote:I'm doing a fuel injection system on my bike. Most of the parts are ordered. I also bought a brand new D&D slip-on off of ebay last night. New brake pads are coming and still need to order a chain and sprocket set.

I saw some colored silicone hoses last night while cruising the net, I'll try to find that link for you.

Thanks Mike

Sorry, hit the wrong quote button................DOH!!!

ALMOST ALL PARTS ORDERED BUT THE LIST CONSISTS OF NEW TIRES, S.S GALFER LINES ON THE FRONT REAR AND CLUTCH, 99 R1 TAIL SWAP 01 R1 SWINGARM, GALFER ROTORS FRONT AND REAR, SINTERED PADS AT BOTH ENDS, POLISHING THE FRAME AND SWINGARM, AND STILL TRYING TO PICK OUT A NEW COLOR. 1 QUESTION THOUGH I WANTED TO DO NEW COOLANT HOSES BUT DIDN'T WANT STOCK ANYONE GOT ANY SUGGS. OR LINKS TO WHERE I MIGHT FIND SOMETHING?

this was the one I intended to quote. Mama did raise an idiot, guess I'm it.

THANKS MIKE......LOL

Dang, and I thought you were trying to help me Mike.

Easy guys, there's enough to go around!

No need to apologize to me for posting up the pics. I think it looks great and can't wait to see a night pic.

Took the bike to be officially "stored" today :sad

At least it's in a nice warm garage, but it really blows knowing it's my last ride for a good 2-3 months.